Walk-in storage rooms that hold set points down to −80 °C with tight uniformity, for vaccines, biologics and biobank samples.
Our ULT cold rooms give you freezer-grade temperatures at room scale. Each room is built around a cascade or two-stage refrigeration package sized to your load, so the space recovers fast after door openings and holds its set point through the night.
Panels use high-density PUF insulation with thermal-break joints and heated door frames, so ice doesn't build up at the seals. Controls log every reading and raise alarms by SMS and email, and a standby refrigeration circuit can take over automatically if the duty unit trips.
Cascade refrigeration holds deep set points at room scale, not cabinet scale.
Air distribution is designed and mapped so every shelf sees the same temperature.
Redundant refrigeration circuits with automatic changeover on fault.
Data logger with audit trail, alarm history and exportable reports.
Frame heaters and pressure-relief ports stop frosting and door suction.
EC fans, electronic expansion valves and smart defrost cut running cost.
| Temperature range | −40 °C to −80 °C |
|---|---|
| Uniformity | ±1 °C to ±2 °C (mapped) |
| Insulation | 150–200 mm PUF panels, 40–42 kg/m³ |
| Refrigeration | Cascade / two-stage, duty + standby |
| Controls | PLC/HMI with data logger, SMS & email alarms |
| Room sizes | Custom, from 10 m³ upward |
Every system is custom-engineered. Final capacities and specifications are confirmed in our proposal for your project.
Pull-down time depends on room volume and the refrigeration package. We size the system to your target and state the expected pull-down time in the proposal.
Yes. We provide temperature mapping, calibration certificates and IQ/OQ documentation on request.
Rooms can be built with a standby circuit that starts automatically, and the alarm system notifies your team at the same time.
Brine and glycol chillers that deliver steady low-temperature fluid for process cooling, reactors and lab work.
One circulating fluid loop that heats to +300 °C and cools to −80 °C on the same skid, for reactor jackets and process vessels.
Insulated cold rooms that hold stable chiller and freezer set points for bulk storage, distribution and cold chain.
Tell our engineers about your process, from a single machine to a full production line. We reply with a spec and a quote, usually within a working day.
